Mac-Source 1994 July

home *** CD-ROM | disk | FTP | other *** search

/ Mac-Source 1994 July / Mac-Source_July_1994.iso / Other Langs / Tickle-4.0 (tcl) / tcl / src / errMac.h next >

Wrap

Text File | 1993-11-18 | 14.4 KB | 312 lines | [TEXT/MPS ]

struct { int errNum; char *errCode; } ErrorCodeTab [] = { 1, "CTB rejected", 2, "CTB failed", 3, "CTB time-out", 4, "CTB not open", 5, "CTB not closed", 6, "CTB no request pending", 7, "CTB not supported", 8, "CTB tools not installed", 9, "CTB user canceled", 11, "CTB unknown error", -50, "error in user parameter list", -200, "Sound Manager Error Returns", -201, "Sound Manager Error Returns", -2, "invalid queue element", -3, "core routine number out of range", -4, "unimplemented core routine", -5, "invalid queue element", -8, "no debugger installed to handle debugger command", -17, "I/O System Errors", -18, "I/O System Errors", -19, "I/O System Errors", -20, "I/O System Errors", -21, "I/O System Errors", -22, "I/O System Errors", -23, "I/O System Errors", -24, "I/O System Errors", -25, "tried to remove an open driver", -27, "IO call aborted by KillIO", -27, "IO abort error (Printing Manager)", -28, "Couldn't rd/wr/ctl/sts cause driver not opened", -29, "unit table has no more entries", -30, "dce extension error", -360, "invalid slot # error", -400, "gcr format on high density media error", -33, "Directory full", -34, "disk full", -35, "no such volume", -36, "I/O error (bummers)", -37, "there may be no bad names in the final system!", -38, "File not open", -39, "End of file", -40, "tried to position to before start of file (r/w)", -41, "memory full (open) or file won't fit (load)", -42, "too many files open", -43, "File not found", -44, "diskette is write protected.", -46, "volume is locked", -47, "File is busy (delete)", -48, "duplicate filename (rename)", -49, "file already open with with write permission", -51, "refnum error", -52, "get file position error", -53, "volume not on line error (was Ejected)", -54, "permissions error (on file open)", -55, "drive volume already on-line at MountVol", -56, "no such drive (tried to mount a bad drive num)", -57, "not a mac diskette (sig bytes are wrong)", -58, "volume in question belongs to an external fs", -59, "file system internal error:during rename the old entry was deleted but could not be restored.", -60, "bad master directory block", -61, "write permissions error", -120, "Directory not found", -121, "No free WDCB available", -122, "Move into offspring error", -123, "Wrong volume type error [operation not supported for MFS]", -1300, "no file thread exists.", -1301, "file id already exists", -1302, "directory specified", -1303, "files on different volumes", -1304, "the catalog has been modified", -1305, "desktop database files are corrupted", -1306, "can't exchange a file with itself", -1307, "file id is dangling or doesn't match with the file number", -5500, "returned by glue.", -5501, "Version non-positive", -5502, "Version bigger than call can handle", -64, "error during font declaration", -65, "font not declared", -66, "font substitution occured", -32615, "bitmap font passed to routine that does outlines only", -84, "I/O System Errors", -64, "I/O System Errors", -64, "drive not installed", -65, "r/w requested for an off-line drive", -67, "couldn't find valid addr mark", -68, "read verify compare failed", -69, "addr mark checksum didn't check", -70, "bad addr mark bit slip nibbles", -71, "couldn't find a data mark header", -72, "bad data mark checksum", -73, "bad data mark bit slip nibbles", -74, "write underrun occurred", -75, "step handshake failed", -76, "track 0 detect doesn't change", -77, "unable to initialize IWM", -78, "tried to read 2nd side on a 1-sided drive", -79, "unable to correctly adjust disk speed", -80, "track number wrong on address mark", -81, "sector number never found on a track", -82, "can't find sector 0 after track format", -83, "can't get enough sync", -84, "track failed to verify", -85, "unable to read same clock value twice", -87, "parameter ram written didn't read-verify", -88, "InitUtil found the parameter ram uninitialized", -89, "SCC receiver error (framing; parity; OR)", -90, "Break received (SCC)", -13000, "Power Mgr never ready to start handshake", -13001, "Timed out waiting for reply", -13002, "during send, pmgr did not start hs", -13003, "during send, pmgr did not finish hs", -13004, "during receive, pmgr did not start hs", -13005, "during receive, pmgr did not finish hs configured for this connection", -100, "No scrap exists error", -102, "No object of that type in scrap", -99, "soft error in ROZ", -99, "hard error in ROZ", -99, "hard error in ROZ", -108, "Not enough room in heap zone", -109, "Master Pointer was NIL in HandleZone or other", -111, "WhichZone failed (applied to free block)", -112, "trying to purge a locked or non-purgeable block", -113, "Address in zone check failed", -114, "Pointer Check failed", -115, "Block Check failed", -116, "Size Check failed", -117, "trying to move a locked block (MoveHHi)", -192, "Resource not found", -193, "Resource file not found", -194, "AddResource failed", -195, "AddReference failed", -196, "RmveResource failed", -197, "RmveReference failed", -198, "attribute inconsistent with operation", -199, "map inconsistent with operation", -186, "resource bent (the bends) - can't decompress a compressed resource", -185, "extended resource has a bad format.", -150, "Color2Index failed to find an index", -151, "failed to allocate memory for temporary structures", -152, "failed to allocate memory for structure", -153, "range error on colorTable request", -154, "colorTable entry protection violation", -155, "invalid type of graphics device", -156, "invalid resolution for MakeITable", -125, "insufficient memory to update a pixmap", -11000, "wrong version of the PictInfo structure", -11001, "the internal consistancy check for the PictInfoID is wrong", -11002, "the passed verb was invalid", -11003, "unable to load the custom pick proc", -11004, "the number of colors requested was illegal", -11005, "the picture data was invalid", -203, "Sound Manager Error Returns", -204, "Sound Manager Error Returns", -206, "Sound Manager Error Returns", -207, "could not allocate enough memory ", -208, "was not type AIFF or was of bad format,corrupt", -209, "the Channel is being used for a PFD already ", -210, "can not operate in the memory allowed", -212, "not enough CPU cycles left to add another task", -220, "no Sound Input hardware", -221, "invalid index passed to SoundInGetIndexedDevice", -222, "returned by synchronous SPBRecord if nil buffer passed", -223, "invalid compression type", -224, "hard drive too slow to record to disk", -225, "invalid sample rate", -226, "invalid sample size", -227, "input device already in use", -228, "input device could not be opened", -229, "invalid input device reference number", -230, "input device hardware failure", -231, "invalid info type selector (returned by driver)", -299, "wrong queue type", -290, "Error; SDM could not be initialized.", -291, "Error; Slot Resource Table could not be initialized.", -292, "Error; Slot Resource Table could not be initialized.", -293, "Error; Cards could not be initialized.", -300, "No card in slot", -301, "CRC check failed for declaration data", -302, "FHeader Format is not Apple's", -303, "Wrong revison level", -304, "Directory offset is Nil ", -305, "This slot is disabled (-305 use to be smLWTstBad)", -307, "Fatal reserved error. Resreved field <> 0.", -308, "Unexpected BusError", -309, "ByteLanes field was bad.", -310, "Error occured during _sGetFHeader.", -311, "Error occured during _sDisposePtr (Dispose of FHeader block).", -312, "_DisposePointer error", -313, "No Board sResource.", -314, "Error occured during _sGetPRAMRec (See SIMStatus).", -315, "No Board Id.", -316, "The InitStatusV field was negative after primary or secondary init.", -317, "An error occured while trying to initialize the Slot Resource Table.", -318, "SDM jump table could not be created.", -319, "BoardId was wrong; re-init the PRAM record.", -320, "BusError time out.", -32768, "Temporarily disable card but run primary init.", -32640, "Reserve range -32640 to -32768 for Apple temp disables.", -330, "Reference Id not found in List", -331, "Bad sList: Id1 < Id2 < Id3 ...format is not followed.", -332, "Reserved field not zero", -334, "Code revision is wrong", -335, "LPointer is nil From sOffsetData. If this error occurs; check sInfo rec for more information.", -336, "Nil sBlock error (Dont allocate and try to use a nil sBlock)", -337, "Slot out of bounds error", -338, "Selector out of bounds error", -339, "_NewPtr error", -340, "_BlockMove error", -341, "Status of slot = fail.", -342, "Error occured during _sGetDrvrName.", -343, "Error occured during _sDisDrvrName.", -344, "No more sResources", -345, "Error occurred during _sGetDriver.", -346, "Bad pointer was passed to sCalcsPointer", -347, "NumByteLanes was determined to be zero.", -348, "Offset was too big (temporary error", -349, "No opens were successfull in the loop.", -350, "SRT over flow.", -351, "Record not found in the SRT.", -450, "edition manager not inited by this app", -452, "not a registered SectionRecord", -453, "edition file is corrupt", -454, "can not use sub parts in this release", -460, "A Publisher is already registered for that container", -461, "could not find editionContainer at this time", -462, "container already opened by this section", -463, "not the first registered publisher for that container", -501, "scrap item too big for text edit record", -502, "bad selector for _HWPriv", -600, "no eligible process with specified descriptor ", -601, "not enough room to launch app w/special requirements ", -602, "memory mode is 32-bit, but app not 32-bit clean ", -603, "app made module calls in improper order ", -604, "hardware configuration not correct for call ", -605, "application SIZE not big enough for launch ", -606, "app is BG-only, and launch flags disallow this ", -620, "insufficient physical memory", -621, "specified range of memory is not held", -622, "cannot make specified range contiguous", -624, "don’t call with interrupts masked", -625, "unable to defer additional functions", -91, "error in soket number", -92, "data length too big", -93, "no network bridge for non-local send", -94, "error in attaching/detaching protocol", -95, "excessive collisions on write", -97, "driver Open error code (port is in use)", -98, "driver Open error code (parameter RAM not configured for this connection)", -1024, "Buffer overflow in LookupName", -1026, "Name confirmed at different socket", -1027, "Duplicate name exists already", -1028, "Name not found on remove", -1029, "Error trying to open the NIS", -1066, "Server cannot support this ASP version", -1067, "Buffer too small", -1068, "No more sessions on server", -1069, "No servers at that address", -1071, "Server cannot open another session", -1072, "Session closed", -1073, "Command block too big", -1074, "Too many clients (server error)", -1075, "No ack on attention request (server err)", -5031, "Volume is Read-Only", -5032, "Object is M/R/D/W inhibited", -900, "PPCToolBox not initialized ", -902, "Invalid or inappropriate locationKindSelector in locationName ", -904, "The system is hosed, better re-boot ", -905, "Network activity is currently disabled ", -906, "Port does not exist at destination ", -907, "Out of session tables, try again later ", -908, "Invalid session reference number ", -909, "bad parameter or invalid state for operation ", -910, "port is already open (perhaps in another app) ", -911, "user name unknown on destination machine ", -912, "Destination rejected the session request ", -913, "user hasn't named his Macintosh in the Network Setup Control Panel ", -914, "A system resource is missing, not too likely ", -915, "unable to contact destination ", -916, "port was closed ", -917, "session was closed ", -919, "PPCPortRec malformed ", -922, "user hasn't typed in owners name in Network Setup Control Pannel ", -923, "The default userRefNum does not yet exist ", -924, "unable to create a new userRefNum ", -925, "An error has occured in the network, not too likely ", -927, "unable to authenticate user at destination ", -928, "Invalid user reference number ", -930, "illegal service type, or not supported ", -931, "location name malformed ", -932, "destination port requires authentication ", -10, "say “MacsBug Installed”", -11, "say “Disassembler Installed”", -13, "say “Extensions Disabled”", -12, "say “HD20 Startup”", -126, "system error code for MBDF not found", -127, "could not find HMenu's parent in MenuKey", -490, "user debugger break", -491, "user debugger break; display string on stack", -492, "user debugger break; execute debugger commands on stack", -1, "unknown error", };